Moreno pipes offer an excellent alternative in various applications due to the many advantages they have. Some of these applications are the following:
- Water and Drains
- Gas Systems
- Industrial Applications
- Subducts for Cables and Optics Fiber
Thanks to the benefits of High Density Polyethylene in pipe applications with Moreno offers the most modern and economical product solution to their projects aqueducts and drains many new and rehabilitation: Adduction and distribution networks for: Drinking water in municipal and industrial waste water in the industrial sector and petrochemical complex in nearby buildings to corrosive areas such as near the sea and / or offshore , widely used in subsea pipelines and aqueducts and wastewater in irrigation projects drip or sprinkler and center pivot irrigation for sanitary sewers , storm , combined and industrial discharges the low coefficient of friction and almost no roughness decreases pressure drop per length , enabling designs with smaller diameters and equipment smaller capacity , and therefore lower costs. During the installation process , the high ductility of the Moreno pipe provide an opportunity to make curves accented radios without accessories, also they offer the possibility of large sections of pipe and welded for positioning and subsequent introduction into the trenches to move regardless of the depth of them. Due to its elastic properties are able to withstand specific variations of pressure above its rated pressure without overdesign the pipe. The use of pipes High Density Polyethylene for domestic gas distribution is of great advantage because of the following characteristics:
Urban domestic gas is distributed at low pressure with the maximum value of 4 bar (60 psi) and the pipe is manufactured to a hydrostatic design 10 bar (150 psi ), giving a safety factor of more than double the densely populated ease of tight connections with welding termofusion ensures a system with 100 % sealing , primarily for such applications because of their resistance to corrosion and fouling the effect of loss of network capacity by decreasing removed premise their internal diameter , thus avoiding the need for maintenance and use of cathodic protection systems , thereby reducing costs.
Tubería Moreno is a pioneer in this type of facility , distributing all pipes and fittings for hot melt to lace. our pipes satisfy demanding requirements of industrial mining system and for a variety of applications such as:
Transport of solid material, Transportation of oil effluents, in refining and in petrochemical complexes Drains submarines sanitary sewage , industrial discharges , stormwater and combined systems dredging Gas projects the products we handle solid material present typical problems pipe corrosion conventional steel ; these pipes offer greater resistance to chemicals and abrasion or wear caused by fluids with suspended solids and sludge leading.
Quality, strength and durability of subducts for telephony , fiber optics, telecommunications and cable television is guaranteed for the customer does not lose its investment. These subducts are offered in several forms such as: black pipe with colored stripes or completely black piping color with colored stripes or fully colored These subductos can have a smooth inner surface and / or striated can lead included inside a cord for pulling the cable during installation are made in rolls or reels whose length depends on the customer's needs its main features are: They are hermetic , corrosion resistant have a high resistance to impact loads required to support Withstand voltage applied processes plow installation High chemical resistance and low weight and flexibility external loads .