Corrugated Health

With Tubería Moreno reaffirms its commitment to Mexico , to offer a differentiated product of superior specification , capable of meeting the needs and requirements of conducting sanitary drainage by gravity , with higher quality and a longer life for the environment.

 The double-walled tube DW has been designed with the latest technology , under the Mexican standard NMX -E -241 - CNCP - 2013 , becoming immediately the benchmark for the industry, both for its exceptional attributes and low acquisition cost and installation , and its long life in operation.

This pipe is used for driving gravity sanitary sewer systems , sewer lines , collectors and emitters , among others.  

• Available in diameters from 100 mm to 1,500 mm (4 "to 60" ) .
• Greater thickness on its inner wall , which increases the stiffness of the pipeIncreased Abrasion Resistance extending its life even in driving effluent with abrasive and chemically aggressive materials
• Joint Design spike- hood with elastomeric gasket in diameters from 4 "to 15 ' and double 18- to 60 "
• Double ceramic green band in diameters from 18 "to 60" Interior wall in high contrast white .

The Pipeline sell from virgin resin , high density polyethylene , which meets a cell minimum classification 435420C stop corrugated outer wall and a cell minimum rating 435420E stop the inner wall Lisa in accordance with the standard NMX -E -241 - CNCP - 2013.

To evaluate the lifetime of the raw material , the material is subjected to the test of constant voltage Ligaments to NCLS ( notched constant ligament stress test), described in the NMX -E -241 - CNCP - 2013 , according to the specified parameters in the same.

The tubes we sell are coupled with an integrated system connecting bell -tang , which complies with the tightness according to the requirements of NOM- 001- CONAGUA - 2011 standard, with the Mexican standard NMX -E -205 - CNCP - 2011 and with the standard. The tightness of the seal is made by using elastomeric gasket placed in the ear tubes by the manufacturer. For tubes of 100 mm to 375 mm ( 4 to 15 inches) in diameter , the shank has a gasket . For tubes of 450 mm to 1500 mm ( 18 to 60 inches) in diameter , the pin has two gaskets and the hood is reinforced with two green tapes composite reinforced polymer matrix unidirectionally fiberglass , these tapes are thermobonded the bell.

The anti-rolling, packaging are made of elastomeric material which meets the requirements of the Mexican standard NMX-T-021-SCFI-2014 in addition to the packaging must show no visible cracking when they are tested at 72 hours of exposure to ozone at a concentration of 50 mPa (PPCM) and a temperature of 40 ° C (104 ° F), according to the Mexican standard NMX-T-181-SCFI-2011. The packages are placed and covered by the pipe manufacturer with a "removable" plastic wrap. This wrapper ensures that the packaging will be protected from storage to installation of the pipe and must be removed for assembly. You must use the lubricant pipe joints recommended by Moreno on packaging and inside the bell prior to assembly. Joints remain sealed even when subjected to a misalignment of 1.5 degrees to the axis. The board supports deflections 5% of the nominal diameter in accordance with the Mexican standard NMX-E-205-CNCP-2011.